Windshield Replacement
When damage is too large, too deep, or in the wrong spot to repair, a correctly installed replacement restores your windshield's structural role in the vehicle — including the sensors and cameras that depend on it.
When to consider this service
Crack longer than a dollar bill
Long cracks compromise structural integrity and generally can't be repaired.
Damage in the driver's line of sight
Even a small chip directly ahead of the driver is often replaced rather than repaired for clarity.
Damage at the edge
Breaks that reach the edge of the glass weaken the windshield's bond to the frame.
Multiple impact points
Several chips or cracks close together usually indicate replacement is the safer path.
Why it's worth doing right
Correctly specified glass
We match glass to your vehicle's exact configuration — acoustic layer, heating elements, camera bracket, and HUD compatibility where applicable.
Proper urethane cure
We follow adhesive manufacturer safe-drive-away times rather than rushing you back on the road.
ADAS-aware installation
Vehicles with a forward-facing camera are flagged for calibration as part of the process.
How it works, step by step
- 1
Vehicle identification
Year, make, model, trim, and VIN (optional) confirm the exact glass specification your vehicle needs.
- 2
Old glass removal
The damaged windshield and existing urethane bead are carefully removed without harming the pinch weld.
- 3
Surface preparation
The frame is cleaned and primed to ensure a proper adhesive bond.
- 4
New glass installation
The replacement windshield is set, bonded, and aligned to factory tolerances.
- 5
Cure time and calibration
The vehicle sits for the adhesive's safe-drive-away time; ADAS calibration is performed if applicable.
Vehicle considerations
- Rain sensors, humidity sensors, and heads-up display projection all depend on correctly specified glass.
- VIN decoding helps confirm trim-specific features so the right glass and clips are used the first time.
ADAS considerations
- Many newer vehicles use a forward-facing camera mounted to the windshield for lane-keeping, automatic emergency braking, or adaptive cruise control. If yours does, the camera typically needs recalibration after the glass is replaced so those systems continue reading the road accurately.
- Calibration may be static (in-shop, using targets) or dynamic (a road test), depending on the manufacturer's procedure for your vehicle.
Paying for this service
Coverage depends on your policy. During your quote, tell us if you'd like to use insurance and we'll help you understand what information your insurer will need — we never guarantee coverage on your behalf.
Frequently asked questions
Ready to get your replacement sorted?
Get a free, no-obligation quote in about two minutes.
Get My Free Quote